Neck Angle jig (templates sold seperatly)
$899.00
NECK ANGLE JIG
The Neck Angle Jig speaks for itself, precisely aligning the neck angle in respect to the body and then routing out the appropriate joints. The tool comes with a Edge vise that is specifically designed to work with the jig, the templates and accessories are sold separately
Dial Indicator height adjustment
FEATURES
Neck angle and side to side adjustment
Dial indicator adjustment
Template adjustment
Copyright ® 2010 LuthierTOOL Company LLC. All rights reserved
Clamp re-location
STANDARD TEMPLATES
Dove Tail templates
Mortis/Tenon templates
All templates are designed for a 5/8 OD template guide. This fixture is to be used with a 1/2" collet router and a 7" diameter base . We recommend using a 1/2" spiral down cut bit for the Mortis and Tenon templates and a 7 degree Dove Tail bit with a 1/2" shank for the Dove Tail and Arch Top templates. Template guides and router bits are sold separately
A "Template set" is a pair of matched templates for the body and neck. Templates are made from aluminum and are sold separately
Guide pins for the truss rod slot is 1/4" in diameter. Other diameters available . Must specify diameter when ordering.
$15.00 per set
Length 24" 610 mm
Width 10" 254 mm
Depth 13" 330 mm
Weight 18 lbs
Side to side angle 4 degree
Neck angle 8 degree
Edge vise template adjustment
Edge vise perpendicularity adjustment
These templates were designed for the European builders.
ADJUSTABLE TEMPLATES
Mortis/Tenon templates
METRIC Mortis/Tenon TEMPLATES
Stock while supplies last
Our lead time is currently 4 weeks from date of order
Digital Dial Indicator. Inches, mm and fractions. ABS and HOLD
$49.95
NECK ANGLE ALIGNMENT